The real truth about speaker cables – exactly what the manufacturers didn’t want you to find out. Speaker cables play an incredibly important role, but many individuals are most often unclear about the thing that makes a great speaker cable, and what you should consider when buying Cayin A100t. A common analogy is that speaker cables are like the arteries of your home entertainment system. Much like your arteries carry blood from the heart and deliver it around the body, so your speaker cables carry audio signals away from your amplifier or receiver and deliver them to the many speakers placed around the room.
With each and every manufacturer claiming their cable provides the best performance it may be extremely hard choosing which type of speaker cable to get; along with prices ranging from a few bucks to literally thousands of dollars per foot, it’s tough to know whether you got an excellent bargain, or were ripped off.
It doesn’t help there is so much misinformation out there; in fact many of the so called experts are in reality just making things worse by spreading myths and rumours disguised as hard facts. With that in mind, below are a few simple things that you should consider next time you venture to buy new cable.
All cables suffer from resistance to some degree but you will find that the thicker the speaker cable, the low the resistance; so it’s wise to choose a cable with a decent gauge. The thickness from the cable may depend on how long you desire the cable to become, but typically of thumb for runs as much as 15 feet a 16 gauge cable ought to be perfectly fine. For runs between 15 and 25 feet make use of a gauge 14 cable, as well as for runs over 25 feet use a 12 gauge cable. Usually the CopperColour Cable (those that have the lower gauge numbers) tend to be more expensive, so don’t be fooled into paying extra for a thick12 gauge cable if a thinner 16 gauge cable would be adequate.
Another reason for much confusion is whether or not to use a connector on the end from the cable. Lots of people argue that it is recommended to only use the bare end from the cable, while equally as many say that you ought to use some sort of connector such as a banana plug or spade terminal. The primary benefit from using connectors is they allow it to be quicker to connect and disconnect the cable quickly, however they do not have bearing on the quality of the sound at all. The simple truth is that it doesn’t really matter the way you connect your speaker cable, the only essential thing would be that the wire is secure as well as the terminal is free of charge from corrosion.
Many people also ask whether the speaker cable has to be the identical length for each and every speaker. In case you are operating a 5.1 or 7.1 surround audio system then it can be very costly to buy enough cable to ensure each cable is exactly the same length and it’s also a total waste of money! This ‘every cable has to be exactly the same length’ myth was just started by manufacturers as being a bhrxeq of getting customers to buy more cable.
Only use as much Line Magnetic 518ia that you need to get in touch each speaker in your amplifier or receiver. There is absolutely no need to make each cable the same length, in the end, what exactly is the part of investing in a 10 foot run of cable in case a 5 foot run is everything required? Be sure that you take careful measurements before buying your cable. A great tip is always to lay out a bit of string following the path you would like your cable to take, you can then appraise the string to find out the actual duration of cable you require.